Toshiba Qosmio Personal Computer X500 - Manual (Page 74)

Troubleshooting Procedures
Qosmio X500 Maintenance Manual (960-Q08) 30
Procedure 4 Replacement Check
Fluorescent lamp, FL inverter, LCD module, HV cable and LCD/FL cable are connected to
display circuits. Any of these components may be faulty. Refer to Chapter 4, Replacement
Procedures, for instructions on how to disassemble the computer and then perform the
following checks:
If LED backlight does not light, perform Check 1.
If characters or graphics on the internal display are not displayed clearly, perform
Check 3.
If some screen functions do not operate properly, perform Check 3.
If LED backlight remains lit when the display is closed, perform Check 4.
Check 1 LCD/FL cable may be faulty. Replace FL/LCD cable with a new one following the
instructions in Chapter 4, Replacement Procedure and test the display again. If the
problem still occurs, perform Check 2.
Check2 FL inverter may be faulty. Replace FL inverter with a new one following the
instructions in Chapter 4, Replacement Procedure and test the display again. If the
problem still occurs, perform Check 3.
Check 3 LCD module may be faulty. Replace LCD module with a new one following the
instructions in Chapter 4, Replacement Procedure and test the display again. If the
problem still occurs, perform Check 4.
Check 4 System board may be faulty. Replace it with a new one following the instructions
in Chapter 4, Replacement Procedure.