T+A Elektroakustik K 6 - Manual (Page 14)

Operation 14
Clearing (erasing) Programs
Operation:
With Tuner selected . . .
   
press
briefly
Call up Tuner Menu *)
e.g.
MODE NORM MODE NORM MODE NORM MODE NORM
    Call up Program Menu *) PROGRAM PROGRAM PROGRAM PROGRAM
    Confirm selection
e.g.
P01 90-60 P01 90-60 P01 90-60 P01 90-60
   
Press repeatedly until the
display shown here ap-
pears on the screen
e.g.
P01 CLEAR P01 CLEAR P01 CLEAR P01 CLEAR
    /    
Set the Program Number
to be cleared
   
to
   
Optional: enter Program
Number to be cleared di-
rectly
e.g.
P02 CLEAR P02 CLEAR P02 CLEAR P02 CLEAR
then
   
Erase program
(brief display)
CLEARED CLEARED CLEARED CLEARED
followed by
e.g.
P02 CLEAR P02 CLEAR P02 CLEAR P02 CLEAR
and / or
   
Leave Tuner Menu (with-
out erasing program, if
desired)
*) The Tuner Menu and the Program Menu are also
displayed on the screen of a TV set connected to the
system (see illustrations on next page).
Explanation:
Programs containing stations received at poor quality, or
the same stations on different frequencies, should be
erased, or cleared.
To clear individual Programs call up the Clear function of
the Tuner Menu. The flashing number is the Program
Number to be cleared. You can either change it the

   /     buttons, or enter the number directly using the
numeric buttons.
Press the     button to clear the Program. Press the
    button to close the Tuner menu.
Notes
If you attempt to clear an invalid Program Number (XX)
the screen will display an appropriate error message:
PXX PXX PXX PXX ERROR ERROR ERROR ERROR . The Tuner Menu then closes.
The tuner is unable to assess the quality at which indi-
vidual stations are received, and for this reason the
automatically stored Programs can also be adjusted
manually. This also applies to transmitters whose full
RDS station name was not picked up during the Autos-
tore process, or which the station does not transmit in
accordance with the RDS norm. To do this we recom-
mend that you call up each Program and attempt to
improve the reception quality by changing the reception
mode (see 'Setting reception mode').
The Program can then be stored again manually; see
'Manual storing of radio programs'. Programs con-
taining poor-quality stations, or the same stations on
different frequencies, should be cleared. If you carry out
the Autostore process again, it ignores already stored
frequencies. Under certain circumstances, e.g. when you
move house, it may be necessary to clear all the Pro-
grams. This procedure is described in the section entitled
'Trouble-Shooting'.
TV screen display of the Tuner Menu and Program Menu