T+A Elektroakustik K 6 - Manual (Page 15)

15 Operation
Exchanging two Programs
Operation:
With Tuner selected . . .
   
press
briefly
Call up Tuner Menu *)
e.g.
MODE NORM MODE NORM MODE NORM MODE NORM
    Call up Program Menu *) PROGRAM PROGRAM PROGRAM PROGRAM
    Confirm selection
e.g.
P07 105-60 P07 105-60 P07 105-60 P07 105-60
   
Press repeatedly until the
display shown here ap-
pears on the integral
screen
e.g.
P07 EX P07 P07 EX P07 P07 EX P07 P07 EX P07
    /    
Set the first Program
Number
   
to
   
Optional: enter first Pro-
gram Number directly
e.g.
P01 EX P01 P01 EX P01 P01 EX P01 P01 EX P01
   
Continue by entering sec-
ond Program Number e.g.
P01 EX P01 P01 EX P01 P01 EX P01 P01 EX P01
    /    
Set the second Program
Number
   
to
   
Optional: enter second
Program Number directly
e.g.
P01 EX P05 P01 EX P05 P01 EX P05 P01 EX P05
then
   
Exchange programs
(brief display)
EXCHANGEd EXCHANGEd EXCHANGEd EXCHANGEd
followed by
e.g.
P01 EX P01 P01 EX P01 P01 EX P01 P01 EX P01
and / or
   
Leave Tuner Menu (with-
out
exchanging pro-
grams, if desired)
*) The Tuner Menu and the Program Menu are also
displayed on the screen of a TV set connected to the
system (see illustrations on previous page).
Explanation:
All the Tuner's Programs are stored in the order in which
the Autostore function detected them.
You can re-arrange the order to suit your preference using
the Exchange function. The process involves exchanging
pairs of Programs (Prog. X and Prog. Y).
Call up the function, then select the Program Number
(Prog. X) to which you wish to assign a new program.
Now set the Program Number (Prog. Y) at which the
program in question is currently stored.
In both cases you can set the Program Numbers using
the
    /     buttons, or enter them directly using the
numeric buttons.
At this point you can still interrupt the Exchange function
by pressing the
    button.
The two Programs are exchanged when you press the

   button.
Press the     button to close the Tuner menu.
Note
When you enter the first Program Number (Prog. X) the
K6 always sets the second Program Number (Prog. Y) to
the same number. This is intended to avoid you ex-
changing Programs accidentally.