T+A Elektroakustik K 6 - Manual (Page 6)

Operation 6
F6 remote control handset
The F6 remote control handset
controls all the functions of the K6
DVD surround receiver. The ad-
justments you make are displayed
on the integral screen and also on
a TV set which is connected to the
system.
CD/DVD
AUX
TAPE
PAUSE
OK
STOP
PLAY
1
4
7
SRC
M
E
N
U
F
U
N
C
T
I
O
N
AMP
T/C
SRND
2
5
8
0
3
6
9
TUNER
TV / STB
VCR
F6
DISP A / B
O
V
L
+

Basic functions
   
press
briefly
Switches the K6 on from the Off state *), and switches the unit
to stand-by mode from the On state.
In stand-by mode the K6's video pass-through circuit remains
in operation, i.e. the programme from the selected video
source continues to be passed to the TV set and video re-
corder, and can therefore still be viewed and/or recorded.
The programme source being passed through the machine is
indicated on the screen. It can be switched at any time using
the F6 RC handset.
*) Note
The pass-through function only works if the primary mains
switch on the underside of the front panel is set to On.
   
press
for 2 sec.
Switches the unit off.
In the Off state only the integral alarm timer remains in opera-
tion, and the integral screen displays the time of day. If the
alarm function is active, the K6 switches itself on automatically
at the programmed alarm time.
   
press
for 2 sec.
Activates screen angle adjustment. The angle is adjusted
using the
    and     buttons.
   
press again
for 2 sec.
Activates screen brightness adjustment. The brightness is
adjusted by pressing the
    and     buttons briefly.
Source select
    Selects the integral CD/DVD player as programme source.
    Selects the integral tuner as programme source.
   
press
repeatedly
if necessary
Selects the inputs AUX-A, AUX-PH and AUX-AV in turn and
selects these units as program source.
   
press
repeatedly
if necessary
Switches to inputs TV and STB (= SET TOP BOX, SAT re-
ceiver), and selects these devices as program source.
   
press
repeatedly
if necessary
Switches to the inputs TAPE 1 (analogue recorder) and
TAPE 2 (digital recorder), and selects these devices as pro-
gram source.
    Switches to the VCR input (video recorder) and selects this as
program source.
Amplifier functions
   
   
Adjusts volume in 1dB increments.
   
short
press
Switches the loudspeaker outputs in the sequence
    A -     B -     A+B.
   
press
for 2 sec.
Switches off the loudspeaker outputs     A and     B
(mute function).
Surround functions (see chapter 'Surround sound - explanatory notes')
   
short
press
Displays the active surround mode on the integral screen.
   
press short
repeatedly
Cycles the current music signal through the possible surround
modes.
   
press long
repeatedly
Cycles the current music signal through the possible surround
modes in reverse order.