Troy-Bilt TB310QS User Manual

Page 3

Advertising
background image

WHILE OPERATING UNIT AS A BLOWER
• Never point the blower in the direction of people or pets, or in the

direction of windows. Always direct the blowing debris away from
people, animals, and windows. Use extra caution when blowing
debris near solid objects such as trees, automobiles, walls, etc.

WHILE OPERATING UNIT AS A VACUUM
• Avoid situations that could catch the vacuum bag on fire. Do not operate

near an open flame. Do not vacuum warm ash from fireplaces, barbecue
pits, brush piles, etc. Do not vacuum discarded cigars or cigarettes
unless the cinders are completely cool.

• The unit is designed to pickup dry material such as leaves, grass, small

twigs, and bits of paper. Do not attempt to vacuum wet debris and/or
standing water as this may result in damage to the blower/ vacuum. To avoid
severe damage to the impeller, do not vacuum metal, broken glass, etc.

OTHER SAFETY WARNINGS
• Always disconnect the spark plug before performing maintenance

or accessing movable parts.

• Never store the unit, with fuel in the tank, inside a building where

fumes may reach an open flame (pilot lights, etc.) or sparks
(switches, electrical motors, etc.).

• Allow the engine to cool before storing or transporting. Be sure to

secure the unit while transporting.

• Store the unit in a dry place, either locked up or up high to prevent

unauthorized use or damage. Keep out of the reach of children.

• Never douse or squirt the unit with water or any other liquid. Keep

handles dry, clean, and free from debris. Clean after each use, see
Cleaning and Storage instructions.

• Keep these instructions. Refer to them often and use them to instruct

other users. If you loan this unit to others, also loan these instructions
to them.

SPECIAL NOTE: Exposure to vibrations through prolonged use of gasoline
powered hand tools could cause blood vessel or nerve damage in the
fingers, hands, and joints of people prone to circulation disorders or
abnormal swelling. Prolonged use in cold weather has been linked to blood
vessel damage in otherwise healthy people. If symptoms occur such as
numbness, pain, loss of strength, change in skin color or texture, or loss of
feeling in the fingers, hands or joints, discontinue use of this tool and seek
medical attention. An anti-vibration system does not guarantee avoidance
of these problems. Users who operate power tools on a regular basis must
closely monitor their physical condition and the condition of this tool.

SAVE THESE INSTRUCTIONS

RULES FOR SAFE OPERATION

This operator's manual describes safety and international symbols
and pictographs that may appear on this product. Read the
operator's manual for complete safety, assembly, operating and
maintenance and repair information.

• SAFETY ALERT SYMBOL

Indicates danger, warning or caution. May be used in
conjunction with other symbols or pictographs.

• HOT SURFACE WARNING

Do not touch a hot muffler or cylinder. You may get
burned. These parts get extremely hot from operation.
When turned off they remain hot for a short time.

• WARNING - READ OPERATOR'S MANUAL

Read the operator’s manual(s) and follow all warnings
and safety instructions. Failure to do so can result in
serious injury to the operator and/or bystanders.

• WEAR EYE AND HEARING PROTECTION

WARNING:

Thrown objects and loud noise can cause

severe eye injury and hearing loss. Wear eye protection
meeting ANSI Z87.1-1989 standards and ear protection when
operating this unit. Use a full face shield when needed.

• KEEP BYSTANDERS AWAY

WARNING:

Keep all bystanders, especially children

and pets, at least 50 feet (15 m.) from the operating area.

• THROWN OBJECTS AND ROTATING CUTTER CAN

CAUSE SEVERE INJURY

WARNING:

Small objects can be propelled at high

speed, causing injury. Keep away from the rotating rotor.

SYMBOL

MEANING

• UNLEADED FUEL

Always use clean, fresh unleaded fuel

• OIL

Refer to operator’s manual for the proper type of oil.

• ON/OFF STOP CONTROL

ON / START / RUN

• ON/OFF STOP CONTROL

OFF or STOP

3

• BLOWER/VACUUM MODE QUICKSHIFT

®

LEVER

A - Vacuum mode

B - Blower mode

• BLOWERS – ROTATING IMPELLER BLADES CAN

CAUSE SEVERE INJURY

WARNING:

Stop the engine and allow the impeller to

stop before opening the vacuum door, installing or
changing tubes or bag, or before cleaning or performing
any maintenance.

• THROTTLE CONTROL

Indicates “HIGH” or “FASTEST” speed.

• THROTTLE CONTROL

Indicates “IDLE”, “LOW” or “SLOWEST” speed

RULES FOR SAFE OPERATION

Advertising