Toshiba DKT3001/2001 - Manual (Page 10)

Introduction
Conventions
vi
Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02
Conventions
Conventions Description
Note
Elaborates specific items or references other information. Within some tables,
general notes apply to the entire table and numbered notes apply to specific
items.
Important! Calls attention to important instructions or information.
CAUTION!
Advises you that hardware, software applications, or data could be damaged if
the instructions are not followed closely.
Extension
Number
Press to answer a call to the Extension Number. Each station can have
multiple extension buttons. Incoming calls ring the extension button(s) from
the top down. Example: station 10’s extensions ring 10-1 first, then 10-2, 10-3,
and 10-4. A station is considered busy when all extensions are being used.
Note The naming convention for DKT assignments within Toshiba is
Directory Numbers. For clarity and ease of understanding, the terms
Extension Number and Phantom Extension Number will be used in
this document in lieu of PDN and PhDN.
$ULDO %ROG
Represents telephone buttons.
+
shows a multiple PC keyboard or phone button entry. Entries without spaces
between them show a simultaneous entry.
Example: Delete+Enter.
Entries with spaces between them show a sequential entry.
Example: +  .
Tilde (~) Means “through.” Example: 350~640 Hz frequency range.
See Figure 10
Grey words within the printed text denote cross-references. In the electronic
version of this document (Library CD-ROM or FYI Internet download), cross-
references appear in blue hypertext.