Distinctive ringing, Hold, Exclusive hold – Toshiba DKT3001/2001 User Manual

Page 24: Consultation hold, Distinctive ringing hold, Exclusive hold consultation hold

Advertising
background image

The Basics

Distinctive Ringing

12

Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02

Distinctive Ringing

1. Press



to enter User Programming Mode.

2. Press a

/LQH

button. The Line LED is steady green.

3. Enter the ringing pitch number for incoming trunk calls:



= Low,



= Middle,



= High,



= Combination

4. Lift the handset to return to idle.

❐

DKT2001: This feature does not work.

Hold

➤

To place a call on hold, press

+ROG

. Your LCD shows the line on hold. The held

Line’s LED flashes while appearances of the line at other stations flash red.

•

To return to the held call, press the held

/LQH

.

•

If you do not return to the held call within a specified time, it rings back to your
phone. The call remains camped-on to your station indefinitely.

•

If the held party hangs up, the call is released.

Note

See the Call Pickup section to pick up a call on hold from another extension.

Exclusive Hold

This feature enables you to place a call on hold so that only you can retrieve it.

➤

While on a call, press

+ROG

twice. That line’s LED flashes while appearances of

the line at other stations are steady red (in use).

Consultation Hold

➤

You place the call on hold by pressing

&QI7UQ

, then dialing another line, talking

on that line, then transferring or going back to the held call by pressing its

/LQH

button.

Advertising