Toshiba DKT3001/2001 - Manual (Page 29)

Advanced Operation
Automatic Busy Redial
Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02
17
Automatic Busy Redial
After reaching a busy outside number, you can activate Automatic Busy Redial so that
the system automatically redials the number at regular intervals. The system repeats
the redial until the line is no longer busy. This feature may not be on some phones on
your system. Automatic Busy Redial is not attempted while your station is busy, but
continues to time-out. The system inserts a pause (P) on your LCD before redialing
the number.
➤
To activate Automatic Busy Redial
1. When you reach a busy number, press &QI7UQ +  . The Line LED is steady
red. You hear busy tone.
2. Hang up or press 6SNU . The system redials, up to 5 to 20 times, every 30 to 180
seconds (depending on system programming). Your telephone receives ring tone
when Automatic Busy Redial dials the number and it is available. The Line and
Spkr LEDs flash green.
3. Lift the handset or press
6SNU
and wait for the party to answer. If you do not pick
up the handset or press 6SNU within recall timeout (5 to 60 seconds) after a
connection is made, you hear a muted ring for another 30 seconds, then the call
disconnects.
➤
To cancel Automatic Busy Redial
➤
Dial  .