Toshiba DKT3001/2001 - Manual (Page 36)

Advanced Operation
Call Park Orbits
24
Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02
Call Park Orbits
The Call Park feature enables you to hold a call temporarily in a location other than
your telephone. These locations are called orbits. You or another telephone user can
retrieve a parked call from its orbit by specifying the orbit number. You can specify
one of 20 General Park Orbits (7000~7019) or a valid extension number within the
system.
Once you have parked a call in an orbit, you can:
• Hang up and retrieve the parked call at a later time
• Originate another call
• Access a voice paging device to announce the parked call for pickup from another
station
If you park a call and it is not retrieved, it will recall to the parking station and one of
the following occurs:
• If your station is idle when the system Call Park recall timer expires, the parked
call automatically recalls to your station.
• If your station is busy, the parked call camps on.
➤
To park a call
1. While on a call, &QI7UQ +  . The LED flashes rapidly.
2. Specify the Park Orbit using one of the following:
• Enter a valid extension.
• Press and the system automatically selects your extension as the orbit.
3. Hang up. The caller’s extension or line number and the orbit number are shown. If
the parked call is not retrieved within a specified time, the call rings back to your
phone.
➤
To retrieve a parked call
1. Dial  .
2. Enter the Orbit Number where the call is parked or to enter the extension from
which you are calling. The extension LED flashes at the in-use rate when the call is
retrieved.