Toshiba DKT3001/2001 - Manual (Page 48)

Advanced Operation
Speed Dial
36
Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02
Make a Call Using Speed Dial
With the DKT3001, there are three ways to initiate a Speed Dial Call (begin with Step
1, then continue to Step 2). With the DKT2001, begin with “Dial
.”
1. Dial (use for DKT3001 and DKT20001 phones)
...or press the fixed 6SGLDO key on a DKT3001 phone
...or press the 6SHHG 'LDO feature key on a DKT3001.
2. Dial the Station or System Speed Dial Number.
Station Speed Dial numbers occupy numbers 100~199. System Speed Dial
numbers occupy numbers 200~999.
Store a Station Speed Dial Number
There are two ways to store a Station Speed Dial number for a DKT3001, including
Access Codes and through CTX WinAdmin.
➤
To store a Station Speed Dial Number using an Access Code
1. Dial

. You hear Entry Tone.
2. Dial the Station Speed Dial number (100~199). You hear Entry Tone.
Note Selected telephones may have the ability to change System Speed Dial
numbers. Follow this procedure but specify a System Speed Dial number
(200~999) instead.
3. Enter the destination digits, then press . You hear Success Tone.
4. Release the phone.
To enter another number, repeat the process, starting with Step 1.
CTX System Administration
The third method of storing station Speed Dial numbers is via your CTX System
Administrator, who can establish your Station Speed Dial number through
administrative software and associate a name with it. This name is used by the
Directory Dialing feature of DKT3014 large display telephones.