Trilogy Touch Technology Trilogy Commander Digital Intercom 9 - Manual (Page 7)

Commander Installation Guide
Issue 9 Trilogy Communications Limited Page 7 of 81
1. I NTRODUCTION
This manual provides installation information for the Commander Digital Intercom
system. Cabling and pin-out information is included for all of the Trilogy manufactured
items plus some commonly used third party equipment. Other information relating to the
hardware configuration will be useful if the system is upgraded or expanded in the future.
• Section 2 covers the matrix assembly and installation, to the point where the matrix
may be powered
• Section 3 covers all of the cabling necessary to complete the installation.
• Section 4 provides information on connecting multiple matrices to form a network.
• Section 5 gives wiring details for the range of Trilogy control panels.
• Section 6 explains the Commander re-programming software, which may be used to
update hardware.
• Section 7 provides information on installing other equipment (e.g. telephones, radio
talkback).
• Section 8 provides information about hardware which is no longer supplied by
Trilogy with new systems.
• Section 9 gives the system specification for matrix hardware, control panels and the
configuration computer.
For further assistance please contact Trilogy Communications Technical Support
Department at the address given at the front of this document. You may also contact us
by e-mail at:
[email protected]
1.1 OPTIONS AVAILABLE AND MODULE TYPE NUMBERS
Please contact our Sales Department for a listing of the current module types.
Due to the nature of talkback systems, any given installation may have some custom
items. Trilogy Communications prides itself on its ability to tailor standard components to
meet specific requirements and is willing to discuss any other customisation as required.