Panasonic WV-SP102 - Manual (Page 25)

24 24
25
[Light control mode]
Select the light control mode from the following.
Indoor scene (50 Hz)
Indoor scene (60 Hz):
Flicker caused by fluorescent lighting will be auto-
matically compensated. Select 50 Hz or 60 Hz cor-
responding to the location where the camera is in
use.
ELC (Maximum exposure time): The lighting control
will be automatically performed by adjusting shutter
speed in the range of ELC.
ELC(1/30s)/ ELC(3/100s)/ ELC(3/120s)/ ELC(2/100s)/
ELC(2/120s)/ ELC(1/100s)/ ELC(1/120s)/ ELC(1/250s)/
ELC(1/500s)/ ELC(1/1000s)/ ELC(1/2000s)/
ELC(1/4000s)/ ELC(1/8000s)*
1 / ELC(1/10000s)* 2
Default: ELC(1/30s)
Note:
• The shorter the maximum exposure time is (->
1/8000s* 1 , 1/10000s* 2 ), the higher possibility to
capture a fast moving object with less blur.
• When a faster shutter speed is selected, the sensi-
tivity will become lower. When a faster shutter
speed is selected, flickering may happen.
• In case flickering happens, it may be improved by
configuring the following settings.
In the area of 50 Hz power supply frequency:
3/100s, 2/100 s, 1/100s
In the area of 60 Hz power supply frequency:
3/100s, 2/120 s, 1/100s
When flickering still remains, set flicker-less mode.
• Under extremely strong lighting, flickering may hap-
pen even when "Indoor scene" is selected for "Light
control mode".
When the brightness (illuminance) level on the
screen is set to a relatively low level with the
[Brightness] buttons, flickering may frequently hap-
pen.
• In such cases, either of the following can reduce
flickering.
• Moderate the illumination intensities of objects by
changing the camera direction.
• Set the brightness (illuminance) level on the screen
to a brighter level with the [Brightness] buttons.
*1
SP105
*2
SP102
[AGC]
Select a method of gain adjustment from the following.
On(High)/ On(Mid)/ On(Low): When the luminance of
the subject becomes darker, gain will be automati-
cally incremented and screen will become brighter.
"High", "Mid" and "Low" are indications of gain
level.
Off: Images will be captured with the fixed gain level.
Default: On(High)
[Auto slow shutter]
The electronic sensitivity enhancement (sensitivity up)
can be carried out by adjusting the storage time of
MOS.
The following are available for the recording duration.
Off(1/30s), Max. 2/30s, Max. 3/30s*
2 , Max. 4/30s, Max.
6/30s* 1 , Max. 8/30s* 2 , Max. 10/30s* 1 , Max. 16/30s* 1
Default: Off(1/30s)
*1 SP105
*2
SP102
Important:
• When "On" is selected for "Auto slow shutter",
frame rate may become lower. Noise or white dots
(blemishes) may sometimes appear.
Note:
• When "Max. 16/30s" is selected, for example, sen-
sitivity will automatically be increased up to x16.
• When "Gain" is set to "Off" or ELC (maximum expo-
sure time) is set to other than 1/30, "Auto slow shut-
ter" is set to Off (1/30 s).
[Simple black & white mode]
Select switching between the color mode and the black
& white mode from the following.
Off: The color mode is selected.
Auto: Switches from color to black-and-white images
when the ambient brightness (illuminance) of the
camera is approx.4 lx or less.
Default: Off
[White balance]
Select a method of white balance adjustment from the
following.
White color can be adjusted by "Red gain" and "Blue
gain".