Panasonic WV-SP102 - Manual (Page 6)

66
7
Important:
• To enhance the security, change the password for the user name "admin". It is recommended to change this
password periodically.
• When displaying multiple H.264 images on a PC, images may not be displayed depending on the performance
of the PC.
Note:
• The maximum number of concurrent access user is 14 including users who is receiving H.264 images and users
who are receiving JPEG images. Depending on the set values for "Bandwidth control(bit rate)" and "Max bit rate
(per client)*", the maximum concurrent access number may be less than 14 users. When 14 users are concur-
rently accessing, the access limit message will be displayed for users who subsequently attempt to access.
When "Multicast" is selected for "Transmission type" of "H.264", only the first user who accessed to monitor
H.264 images will be included in the maximum number.
• When "On" is selected for "H.264 transmission" (☞ page 20), H.264 images will be displayed. When "Off" is
selected, a JPEG image will be displayed. It is possible to display a JPEG image even when "On" is selected for
"H.264 transmission". In this case, the refresh interval of JPEG images will be limited to 5 fps.
• The refresh interval may become longer depending on a network environment, PC performance, photographic
subject, access traffic, etc.
<Refresh interval of JPEG images>
When "On" is selected for "H.264 transmission": Max. 5 fps
When "Off" is selected for "H.264 transmission": Max. 30 fps