Panasonic WV-SP102 - Manual (Page 49)

48 48
49
Configure the settings relating to the FTP periodic image trans-
mission [FTP img. trans.]
Click the [FTP img. trans.] tab on the "Network" page. (☞ Pages 13 and 14: How to display/operate the setup
menu)
The settings relating to the periodic transmission of images to an FTP server can be configured on this page. To
transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance
(☞ page 42). Refer to page 50 for descriptions of how to configure schedules of image transmission.
Important:
• Depending on the network line speed or the network traffic, images may not be transmitted at the exact desig-
nated interval or period.
• When "On" is selected for both of the alarm image transmission function and the FTP periodic image transmis-
sion function, the alarm image transmission function will be given priority over the FTP periodic image transmis-
sion function. For this reason, images may not be transmitted at the exact designated interval or period if alarms
occur frequently.
■ FTP periodic image transmission
[FTP >>]
When "FTP >>" is clicked, the [FTP] tab of the "Server"
page will be displayed. (☞ Page 42)
[FTP periodic image transmission]
Select "On" or "Off" to determine whether or not to
transmit images using the FTP periodic image transmis-
sion function.
When "On" is selected, it is necessary to configure the
settings of the FTP server. (☞ Page 42)
Default: Off
[Directory name]
Enter the directory name where the images are to be
saved.
For example, enter "/img" to designate the directory
"img" under the root directory of the FTP server.
Available number of characters: 1 - 256 characters
Default: None (blank)
[File name]
Enter the file name (name of the image file to be trans-
mitted) and select the naming option from the following.
Name w/time&date: File name will be ["Entered file
name" + "Time and date (year/ month/ day/ hour/
minute/ second)" + "Serial number (starting from
00)"].
Name w/o time&date: File name will be the characters
entered for "File name" only. When "Name w/o
time&date" is selected, the file will be overwritten
each time a file is newly transmitted.
Available number of characters: 1 - 32 characters
Default: None (blank)
[Transmission interval]
Select the interval for the FTP periodic image transmis-
sion from the following.
1s/ 2s/ 3s/ 4s/ 5s/ 6s/ 10s/ 15s/ 20s/ 30s/ 1min/ 2min/
3min/ 4min/ 5min/ 6min/ 10min/ 15min/ 20min/ 30min/
1h/ 1.5h/ 2h/ 3h/ 4h/ 6h/ 12h/ 24h
Default: 1s