Panasonic WV-SP102 - Manual (Page 4)

44
5
Viewer software
• It is necessary to install the viewer software "Network Camera View 4S" to display images on a PC. This soft-
ware can be installed directly from the camera or by double clicking "nwcv4Ssetup.exe" on the CD-ROM pro-
vided, and then following the on-screen instructions.
Important:
• The default setting of "Automatic installation of Viewer software" is
"On". Follow the instructions on page 63 when the message is dis-
played on the information bar of the browser.
• When the "Live" page is displayed for the first time, the install wiz-
ard of the ActiveX control required to display images from the cam-
era will be displayed. Follow the instructions of the wizard.
• When the install wizard is displayed again even after completing the
installation of the ActiveX, restart the PC.
• The viewer software used on each PC should be licensed individu-
ally. The number of installations of the viewer software from the
camera can be checked on the [Upgrade] tab of the "Maintenance"
page (☞ page 54). Refer to your dealer for the software licensing.