Panasonic WV-SP102 - Manual (Page 40)

40 40
41
Configure the settings relating to the priority stream [System]
Click the [System] tab on the "User mng." page. (☞ Pages 13 and 14: How to display/operate the setup menu)
The description below is the configuration of the priority stream that can transmit images without deteriorating the
image quality and refresh interval even when multiple users access concurrently.
■ Priority stream
[Activation]
Select "On" or "Off" to determine whether or not to use
the priority stream.
Default: Off
Note:
• When "On" is selected for "Activation" of "Priority
stream", number of users who can access the unit
may be limited.
[Destination IP address (1)]
Enter the first destination IP address.
[Destination IP address (2)]
Enter the second destination IP address.
[Stream type]
Select either "JPEG", "H.264(1)" or "H.264(2)".
JPEG: JPEG images will be transmitted.
H.264(1): H.264(1) images will be transmitted.
H.264(2): H.264(2) images will be transmitted.
Default: JPEG
[Refresh interval*]
Select the refresh interval from the following.
This setting is validated only when "JPEG" is selected
for "Stream type".
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/
6fps*/ 10fps*/ 12fps* (PAL model)/ 15fps*/ 30fps*
Default: 1fps
Note:
• When "On" is selected for "H.264 transmission", the
refresh interval may be longer than the set value
when any value with an asterisk (*) on the right is
selected.
[Image capture size]
Select the image capture size from the following.
When "4:3" is selected for "Aspect ratio"
QVGA/ VGA/ 1280x960* 1
When "16:9" is selected for "Aspect ratio"
320x180/ 640x360/ 1280x720* 1
This setting is validated only when "JPEG" is selected
for "Stream type".
Default: 1280×960*
1
VGA* 2
*1
SP105
*2 SP102