Toshiba D-VR3SB - Manual (Page 41)

English - 41
S
ystem Setup
VCR Setting
If you want your VHS Video tapes to play automatically
when you insert them, turn on Auto Play.
Select “System”
Use the ❷ buttons to highlight “System” then
press the OK button.
3
Programme
„ Only tapes that are missing the Record Safety
Tab will play automatically when inserted.
Note
Select Change Password using ❷ buttons,
then press the ❿ or OK button.
• The ‘Enter the password.’ message will be
displayed.
1
Enter the 4-digit password using the 0 to 9 but-
tons on the remote control.
• The ‘Confirm the password.’ message will be
displayed.
2
Enter your password again using the 0 to 9 but-
tons on the remote control. 3
About the Change Password;
„ Press the RETURN or ➛ button to return to
the previous menu. Press the MENU button to
exit the menu.
Note
Open “MENU”
With the VCR in play mode, Press the MENU
button.
1
Select “Setup”
Using the ❷ buttons, move the selection bar
to “Setup” then press ❿ or OK button to select.
2