Toshiba D-VR3SB - Manual (Page 67)

English - 67
P
layback
Variable Search
System
Press the QUICK button to display the search
screen in the stop mode. When a program is record-
ed, the starting point is given an Index mark for easy
location. However, the VHS Index Search System
(VISS) cannot recognize index marks made by old
VCRs. If the VCR has trouble finding a mark, it is proba-
bly because the cassette was recorded on a VCR with-
out VISS. If you want to index two programs in a row,
set your VCR to stop, then start recording each
program.
Go to [0:00:00] stop
Use this feature when you want to search for the
[0:00:00] counter position on a cassete.
Press the CLEAR button at the point on the tape
where you want to set the counter to [0:00:00].
1
Select “Go To Zero”, and then press the OK
button.
3
While a cassette is stopped, press the QUICK
button. 2
Select “End Search”, and perss the OK button. 2
While a cassette is stopped, press the QUICK
button.
1
Note
„ The VCR will rewind or fast forward, search-
ing for the [0:00:00] counter position, and then
automatically stop at that position.
Note
„ The VCR will fast forward, searching for a
blank position, and then automatically stop at
that position. If the VCR reaches the end of
the tape during end search, the tape will be
ejected.
Scan and play
End search
Use this feature when you want to search for a blank
position to record a program on a cassette.
Use scan and play when you don’t know exactly where
a program is located on a cassette tape.
- Forward Intro Scan
Highlight “Forward Intro Scan”, then press the OK but-
ton.
- Reverse Intro Scan
Highlight “Reverse Intro Scan”, then press the OK but-
ton.