Toshiba D-VR3SB - Manual (Page 46)

46 - English
S
ystem Setup
• RGB : Sends RGB signal from the AV JACK
(SCART terminal)
• Video : Sends COMPOSITE VIDEO signal from
the AV JACK (SCART terminal).
AV1 Output Video
RGB
Front Display : Automatic
NICAM : On
Programme
NICAM
AV 1 Output
NICAM programmes are divided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual (transmis-
sion in another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select the
desired sound.
5
To... Press or ❷ , until...
Mono mode Off is displayed.
Off: Only set at this position to
record the standard mono
sound during a NICAM broad-
cast if the stereo sound is dis-
torted due to inferior reception
conditions.
NICAM mode On is displayed.
On: Normally set at this position.
Select “Setup”
Using the ❷ buttons, move the selection bar
to “Setup” then press ❿ or OK button to select.
2
Open “MENU”
With the VCR in play mode, Press the MENU
button.
1
On completion, press RETURN three times to
exit the menu. 6
Select “System”
Using the ❷ buttons, move the selection bar
to “System” then press ❿ or OK button to select.
3
Programme
VCR
Front Display : Automatic
NICAM
AV1 Output
OFF
On
Programme
Select “NICAM”
Using the ❷ buttons, move the selection bar
to “NICAM” then press ❿ or OK button until
NICAM option is selected.
4