Toshiba D-VR3SB - Manual (Page 70)

70 - English
R
ecording
Recording the current
Programme you are watching
DVD-RAM DVD-RW DVD-R
1. Check the aerial cable is connected.
2. Check the remaining time of disc.
DVD-RAM/DVD-RW discs should be formatted in
advance before beginning recording. Most new discs are
sold unformatted. Make sure to format your unformatted
discs before recording.
3. Corresponding station should be preset.
Press the OPEN/CLOSE button and place a
recordable disc on the disc tray. 1
Press the OPEN/CLOSE button to close the disc
tray. 2
• Press the PROG/TRK / buttons to select
the station you want to record.
• The AV1, AV2 or AUX using the INPUT SEL.
button for a satellite tuner or exteral Video
source.
3
Press the REC SPEED button on remote control,
to select the recording speed (quality).
• XP(High, approx. 1 hour) Æ SP(Standard,
approx. 2 hours) Æ LP(Low, approx. 4 hours)
Æ EP(Extended Play, approx 6 hours)
4
Press the
z
(REC) button. 5
Press the (STOP) button to stop or finish a
recording in progress.
• The message “Updating the information of
disc. Please wait for a moment”.
6
• Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause
to resume recording.
• You can switch stations by pressing the PROG/TRK
/ buttons while recording pauses.
Pausing / Resuming
„ You can’t change the recording speed and
programme during recording.
„ Recording will stop automatically if there is not
enough space for recording.
„ Up to 99 titles can be recorded onto a disc.
„ If the power interrupted due to power failure or
other reasons, the title being recorded will not
be saved onto the disc.
„ Recording will stop automatically if a copy pro-
tected image is input.
„ Do not use DVD-R authoring discs with this
unit.
Note