Toshiba RD-XS24SB - Manual (Page 29)

29
Connections
Basic setup
Introduction
3) After setting all the items, press ENTER.
The following message appears.
4) Press / to select “Yes”, then press ENTER.
The “Initial settings” menu returns.
Notes
• This recorder is provided with a calendar extending to
2069. (However, this does not mean that the recorder is
supported to 2069.)
• To go back to the previous menu, press the RETURN
button.
• To exit the menu, press the SETUP button.
2 Channel setting
Press / to select “Auto” or “Manual”, then press
ENTER.
Auto
: Automatically presets the receiving
channels of UHF E21-E69. page 29
Manual : Manually sets the receiving channel and
channel skip. page 29
Select “Manual” to set the channel if not set correctly
by “Auto”.
Auto (Auto channel setting)
When you select “Auto” and press ENTER, the Auto
channel setting function automatically starts.
• The previous screen is displayed when the Auto
channel setting is completed.
• To cancel the Auto channel setting function while it is
running, press the ENTER button while “Cancel” is
highlighted.
Yes No
Set date and time?
Auto Scan TV 1–24 CH
Cancel
e.g.
O
1 BBC1
BBC2
I TV
CH4
CH5
2
3
4
5
Manual 1/20
Position Home CH
28
37
2-25 2-25
3-32
Station Skip
Off
Off
Off
Off
On
MFT
0
0
0
0
0
Return Clear Set O O Select FRAME/ADJUST FRAME/ADJUST
Adjust
22
Tuning
range
number
Channel number
O
6 - - -
- - -
- - -
- - -
- - -
7
8
9
10
Manual 2/20
Position Home CH
- - -
- - -
- - -
- - -
Station Skip
On
On
On
On
- - -
MFT
0
0
0
0
- - -
O FRAME/ADJUST
- - -
O
1 BBC1
BBC2
I TV
CH4
CH5
2
3
4
5
Manual 1/20
Position Home CH
28
37
2-25
3-32
Station Skip
Off
Off
Off
Off
On
MFT
0
0
0
0
0
O FRAME/ADJUST
22
e.g.
e.g.
• The Auto channel setting function may not work,
depending on the radio reception or other conditions. If
the Auto channel setting function does not work
successfully, use the “Manual” channel setting menu to
enter the channel information.
Manual (Manual channel setting)
1) When you select “Manual” and press ENTER,
the following screen appears.
2) Press / to move the cursor to the receiving
channel (“Home CH”) of a position (“Position”)
where you want to set the channel.
3) Press PAUSE ( ) and select the tuning range
number for the receiving channel.
See the table below to obtain the tuning range
number.
4) Press ADJUST (–/+) to set the receiving
channel.
Press SLOW/REV (
) or FWD/SLOW ( ) to
search the station that you want to receive.
5) Press / to move the cursor to “Station”.
Tuning range
number
1
– (No display)
2
3
TV channel number
A – J (1 – 10), 11, 13,
E2 – E12 (82 – 92)
E21 – E69 (21 – 69)
X, Y, Z (71, 72, 73)
1 – 53 (48MHz to
464MHz, 8MHz steps)
S1 – S41 (1 – 41)
Band
VHF
UHF
CATV
CATV (IRELAND)
CATV (CCIR)
RD-XS24SB_inst(E)_21-30 8/31/05, 5:41 PM 29