Toshiba RD-XS24SB - Manual (Page 40)

40
Example: Setting this recorder’s remote control mode to DR 2, after another HDD/DVD recorder has been
set to DR 1.
(It is necessary to set the remote control mode on both the recorder and the remote control.)
Setting up the recorder
1
Press SETUP.
The setting menu appears.
2
Press / to select “Operational settings”,
then press ENTER.
3
Press / to select “IR code”, then press
ENTER.
4
Press / to select “DR 2” (example), then
press ENTER.
The submenu disappears.
By pressing the ENTER button, the selected command
mode is set in the recorder. Operation may not be
possible temporarily until you set the corresponding mode
in the remote control itself. Proceed to the next setting.
SETUP
ENTER
ENTER
Operating the second and third TOSHIBA HDD/DVD video recorders with the remote control of this recorder
Switches the codes to operate the recorder.
If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each
recorder to avoid confusion in the response of the recorders.
Title thumbnail point
HDD/RAM title play
Instant replay interval
35
Title resume
3
Photo
10
Operational settings
Priority contents
Still group interval
Instant skip interval 30
sec.
sec.
sec.
sec.
IR code DR 1
e.g.
Title thumbnail point
HDD/RAM title play
Instant replay interval
35
Title resume
3
Photo
10
Operational settings
Priority contents
Still group interval
Instant skip interval 30
sec.
sec.
sec.
sec.
IR code DR 1
e.g.
DR 1
DR 3
DR 2
D: Remote control settings (Continued)
Basic setup
1 2 3
4 5 6
7 8 9
+10 0
TV DVD
INPUT SELECT
CHANNEL
MODE
RETURN
SLOW/REV FWD/SLOW
PLAY
STOP
PAUSE
REC
SKIP REV SKIP FWD
–ADJUST ADJUST+
TV/DVR DELETE
CLEAR
EXIT
ENTER
QUICK MENU
OPERATION
INSTANT
SKIP
INSTANT
REPLAY
NUMBER
HDD DVD
TOP MENU MENU
MENU TIMESLIP
CHANNEL VOLUME INPUT SELECT
OPEN/CLOSE
CHP DIVIDE ANGLE SUBTITLE AUDIO
REC MODE ZOOM SEARCH DISPLAY
PROGRESSIVE EXTEND SETUP REMAIN
Start
ENTER
RD-XS24SB_inst(E)_34-41 8/31/05, 5:42 PM 40