Toshiba Multiprotocol Ethernet Interface for Toshiba G9/VFAS1 Adjustable Speed Drives ASD-G9ETH - Manual (Page 60)

59
ICC
11.2 Using FTP with Windows Explorer
To use FTP with Microsoft Windows Explorer,
first open either “Windows Explorer” or “My
Computer”. Refer to Figure 64. Please note
that the indicated procedure, prompts and
capabilities outlined here can vary depending
on such factors as the installed operating
system, firewalls and service packs.
In the “Address” field, type in “ftp://root@” and
then the IP address of the target interface card
(if the user name has been changed from its
default, then replace “root” in “ftp://root@” with
the new user name.) Refer to Figure 65.
Figure 65: FTP Navigation with Windows Explorer
You will then be presented
with an authentication dialog
(refer to Figure 66.) The
user name will already be
filled-in. Enter the case-
sensitive password (default
is “icc”) and click “Log On.”
Windows Explorer will then
display the filesystem’s
contents (refer to Figure 67.)
You can now perform normal
file manipulation actions on
the available files (cut, copy,
paste, open, rename, drag-
and-drop transfers etc.) in
the same manner as though
you were manipulating any
traditional file stored on your computer’s hard drive.
Figure 64: Accessing Windows
Explorer
Figure 66: FTP Authentication