Toshiba Multiprotocol Ethernet Interface for Toshiba G9/VFAS1 Adjustable Speed Drives ASD-G9ETH - Manual (Page 97)

96
ICC
Figure 108: Creating a Control File
c) Follow the same procedure to create a data file. This file will be used to
store the incoming data read from the interface card. Enter a file number
(e.g. 18), set the type to “Integer”, enter a descriptive name (e.g. “DATA”),
and enter a number of elements (e.g. 200). Refer to Figure 109. Click OK
to create the file.
Figure 109: Creating a Data File