Toshiba Multiprotocol Ethernet Interface for Toshiba G9/VFAS1 Adjustable Speed Drives ASD-G9ETH - Manual (Page 82)

81
ICC
11) The program is now complete.
12) Save, download and run the program.
13.2.6 ControlLogix Example: AC/DC Drive Profile Add-On
Instruction
The AC/DC drive profile Add-On Instruction (AOI) is a simple interface to command
and monitor the inverter. It is based on I/O assembly instances 21 & 71.
1) Complete all the steps in section 13.2.4. Please note that the Assembly Input
Instance must be changed to 71 and the Assembly Output Instance must be
changed to 21. Refer to Figure 87.
Figure 87: AC/DC Drive Profile Generic Ethernet Module Configuration
2) Right click on “Add-On Instructions” in the controller organizer view and select
“Import Add-On Instruction”. Browse and import the AC/DC drive profile AOI.
Refer to Figure 88.
Figure 88: AC/DC Drive Profile AOI
3) Double click “Controller Tags” in the controller organizer view and select the
“Edit Tags” tab at the bottom.
4) Create the tags in Figure 89.