Logging/memory led, Sv tracking led, Radio led – Trimble Outdoors 5700/5800 User Manual
Page 50: Logging/memory led sv tracking led radio led, 5700 gps receiver oper ation

4 General Operation
3 8 5700/5800 GPS Receiver User Guide
5700 GPS Receiver Oper
ation
42.1
Logging/Memory LED
The yellow Logging/Memory LED below the
[D]
button indicates the
status of data logging and memory usage.
42.2
SV Tracking LED
The red SV Tracking LED below the SV icon
indicates the status of
satellite tracking.
42.3
Radio LED
The green Radio LED below the Radio icon
indicates the status of
data input and output.
Behavior
Meaning
On
Data is being logged.
Slow flash
Enough FastStatic data has been logged. Alternatively, if
the red SV Tracking LED is on solid at the same time, the
receiver is in Monitor mode, and is checking for new
firmware to install.
Fast flash
Data is being logged but memory is low.
Flash
The receiver is in Sleep mode, and will wake up five
minutes before the scheduled start time of a timed
application file.
Off
Data is not being logged, or the CompactFlash card is
full.
Behavior
Meaning
Slow flash
Tracking four or more satellites.
Fast flash
Tracking three or fewer satellites.
Off
Not tracking any satellites.
On
The receiver is in Monitor mode, and is checking for new
firmware to install.
Behavior
Meaning
Slow flash
A data packet or event marker has been received.