Trimble Outdoors 5700/5800 - Manual (Page 73)

5700/5800 GPS Receiver User Guide 61
Transferring Data 6
5700 GPS Receiver Oper
ation
Use the USB cable to connect the 5700 receiver to the computer, as
shown in Figure 6.2.
Figure 6.2 Connecting 5700 receiver to a computer for USB data
transfer
Note – When the 5700 receiver is connected to a USB port on a computer,
it is treated as a peripheral device of the computer. If the receiver is
unplugged or powered down, a warning message is displayed on the
computer.
USB cable
USB port
USB port