Trimble Outdoors 5700/5800 - Manual (Page 98)

10 Cables and Connectors
8 6 5700/5800 GPS Receiver User Guide
5700 GPS Receiver Oper
ation
This chapter provides pinout information for the 5700 receiver
standard and optional cables. This information can be used to build
special cables for connecting the 5700 receiver to devices and
instruments not supported by the standard and optional cables.
10.1
Port 1, 2, and 3 Connectors
Figure 10.1 shows the location of the 5700 serial ports.
Figure 10.1 5700 serial ports
Figure 10.2 gives pinout requirements for the connector labeled
Port 1. The pin locations for the Port 2 and Port 3 connectors are
identical.
1 2
GPS
RADIO
Port 1 Port 2 Port 3