Trimble Outdoors 5700/5800 - Manual (Page 55)

5700/5800 GPS Receiver User Guide 43
General Operation 4
5700 GPS Receiver Oper
ation
when power was lost. For example, if the receiver was logging data, the
data file is not corrupted, and when power is restored the receiver
resumes logging with the same settings as before.
The power supply that comes with the 5700 receiver charges the
internal batteries while they are still in the receiver. To do this, connect
the power supply to the power/serial data cable, connect the cable to
Port 2 on the receiver and then connect the power supply to an AC
power source, as shown in Figure 4.2.
Figure 4.2 Charging the batteries
2 3
t
Power/serial data cable
To AC
power supply