Uniden WNP1000 - Manual (Page 17)

33
The “General Information” page will then be displayed.
Once this page is displayed, click the Reboot button.
The following pop-up will appear.
34
Click OK and wait for the WNP1000 Wireless AP to reboot and
display the “General Information” page again. The upgrade
process is complete.
Please remember that configuration changes that you make
through the user interface (including firmware upgrades) are
automatically saved into the flash memory of the WNP1000
Wireless AP. However, changes will not take effect until after
you restart the WNP1000 Wireless AP by clicking the Reboot
button.