Uniden WNP1000 - Manual (Page 2)

3
Welcome
Congratulations on your purchase of the
WNP1000 802.11b Wireless Access Point (AP).
This WNP1000 Wireless AP is designed and engineered to
exacting standards for reliability, long life and outstanding
performance.
With the WNP1000 Wireless Access Point, you can connect
your 802.11b compliant wireless computers or other clients to
establish a wireless network in your home or office.
Features
§ Complies with the IEEE 802.11b Direct Sequence
Specification
§ Complies with IEEE 802.3, IEEE 820.3u for Ethernet
connection
§ Supports 1, 2, 5.5 and 11 Mbps Data Rate on the
wireless interface
§ Supports 10/100Mbps, full/half duplex, Auto-negotiation
on the Ethernet interface
§ Supports up to 32 wireless clients
§ WEP 64/128-bit data encryption for security
§ Layer 2 Roaming capability
§ Remote management via SNMP protocol
§ Supports MIB II and IEEE802.11b MIBs
§ Remote management via web browser
§ Firmware upgrade via HTTP using web-browser
interface
Uniden® is a registered trademark of Uniden America Corporation.
and Your Gateway To The Evolution  are a trademarks of Uniden America Corporation.
Windows® 98/2000, Millennium, and XP are registered trademarks of Microsoft® in the United States and/or other countries.
Other brand and product names are trademarks or registered trademarks of their respective holders.
Information is subject to change without notice.
4
Installation
Package Contents
The following items are included in your package:
•
One WNP1000 unit with stand
• One 7.5V DC 1A power adapter
• Two screws for wall mounting
•
One Easy Start Guide
•
CD containing the Owner’s Manual