Uniden WNP1000 - Manual (Page 6)

11
General Information
You are now logged into the Configuration tool for the
WNP1000 Wireless AP. To navigate the tool, click on any
items located on the left side of the page.
The fields on the “General Information” page are described
below. To see the current status, click the Refresh button.
• Hardware Version: Displays the hardware version of your
WNP1000 Wireless AP.
•
Software Version: Displays the version of the software
installed on the WNP1000 Wireless AP. This changes
whenever you install a software upgrade.
• Time since last boot: Displays the time that has elapsed
since the WNP1000 Wireless AP was last started.
12
• LAN MAC Address: Displays the Ethernet MAC address of
the LAN (Ethernet) interface of the WNP1000 Wireless AP.
A MAC address consists of six 2-digit number pairs that
uniquely identify an Ethernet device.
• Wireless MAC Address: Displays the MAC address of the
wireless interface of the WNP1000 Wireless AP.
•
IP Address: Displays the IP address of the local LAN
interface of the WNP1000 Wireless AP. The default IP
address is 192.168.1.10.
•
Subnet Mask: Displays the local subnet mask of the LAN
interface of the WNP1000 Wireless AP. The default subnet
mask is 255.255.255.0.