Uniden NEO TRUC56 - Manual (Page 23)

BASICS
B A S I C S [ 21 ]
1) When the phone is in the standby mode, press MENU/MUTE .
2) Press UP or DOWN to move the pointer to
“ Ringer Volume ”, then press SELECT/CH .
3) Press UP or DOWN to move the pointer through the ringer
settings (Ringer Off, Ringer Low, or Ringer High).
You will hear a ringer or melody at the selected volume
(or does not ring when you select “
Ringer Off ”).
4) Press SELECT/CH , and you will hear a confirmation tone.
5) Press END to exit.
Ringer Volume Setup
The vibrator mode allows you to vibrate the phone when you receive
a call and the handset is off the base.
1) When the phone is in the standby mode, press MENU/MUTE .
2) Press UP or DOWN to move the pointer to “ Vibrator Mode ”,
then press SELECT/CH .
3) Press UP or DOWN to choose “ Vibrator On ” or
“ Vibrator Off ”.
4) Press SELECT/CH . You will hear a confirmation tone.
5) Press END to exit.
Setting up the Vibrator Mode
• If you select
“ Ringer Off ”,
<Ringer Off>
appears on the display
when you make or
receive calls, or when
charging the handset.
• The phone is designed
to ring even when the
phone is set to vibrator
mode. To avoid hearing
the ring, turn the
ringer off.
TRUC56_OM 12/11/02 9:25 AM Page 21