Uniden NEO TRUC56 - Manual (Page 29)

PHONEBOOK
P H O N E B O O K [ 27 ]
Phonebook allows you to dial a number using just a few key presses.
Your phone stores names/numbers in the phonebook memory location, and you can search
names in alphabetical order. You have a total of 100 locations that can be used for the
phonebook (including the Speed dials) and Caller ID messages.
Phonebook
• If any of the following occurs during a phonebook operation will be canceled.
-Press END. The phone will return to the standby mode (or the call will be disconnected).
-Press TALK/FLASH or DEL/TRANS.
-Charge the handset.
-Receive an incoming call, page, or transferring call (from the standby mode only).
-Receive a CIDCW (Caller ID on Call Waiting) (during a call only).
• The idle time is 30 seconds. If the handset remains idle for 30 seconds, the phone will return to the
standby mode (or back to the call).
Storing Phone Numbers, Names, Distinctive
Rings, and Speed Dial
1) When the phone is in the standby mode, press PB/ROCKET/ t . The handset displays the
number of the phonebook locations used, and information on searching and storing
phonebook locations.
(1st line) the number of the phonebook locations used
(2nd line) How to search (press the number keypad,
UP or DOWN )
(3rd line) How to enter the storing operation (press SELECT/CH )
• When the memory is full,
you will hear a beep and
“
Memory Full ”
appears. You cannot store
names and numbers.
• The pause key counts as
one digit. Pressing RDL/P
more than once increases
the length of pause
between numbers.
TRUC56_OM 12/11/02 9:25 AM Page 27