Uniden NEO TRUC56 - Manual (Page 43)

EXP
ANDING YOUR
PHONE
E X PA N D I N G Y O U R P H O N E [ 41 ]
Your phone supports up to 2 handsets (the original handset and the second handset).
You can now place a fully featured cordless handset anywhere AC power is available
to connect the handset charger. Additionally, you can transfer an outside call to
another handset.
Expanding Your Phone
• We refer to the TXC400 handset as the second handset, and the TRUc56 handset as the original
handset in this section.
• Before using TXC400, charge the TXC400 battery pack for at least 15-20 hours, and register the
TXC400 handset to the TRUc56 base.
• If the registration fails, “ Registration Failed ” appears. Register the TXC400 again.
• You must complete the registration operation within 30 seconds, or the phone returns to the
standby mode.
Registering the Second Handset
You need to register the second handset before using. To register the second
handset, do the following steps.
1) Unplug the AC adapter of the TRUc56.
2) Press and hold
PAGE on the TRUc56 base, while you plug in the AC Adapter, hold PAGE
until the status LED on the base flashes.
3) Press talk/flash on the TXC400’s handset. “ Handset Registering ” appears. When
the operation is finished, you will hear a confirmation tone and “ Registration
Complete ” will appear. The status LED is no longer illuminated.
TRUC56_OM 12/11/02 9:26 AM Page 41