U-Line 30 - Manual (Page 108)

108
Selecting the Drive Mode
Changing the Drive Mode
1. Set the program selector to
Q.
2. Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
Continuous Shooting/High-Speed Continuous Shooting
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button.
❍ Maximum number of continuous shots at one time:
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when card is full.
❍ The number of frames per second may be lower when “
” (camcorder
shake warning) is displayed on the screen.
CARD PLAY CARD CAMERA PLAY (VCR) CAMERA
CARD PLAY CARD CAMERA PLAY (VCR) CAMERA
Still Image Size
Maximum Number
of Continuous Shots
1632 × 1224 2 frames 3 frames 10 images
1280 × 960 3 frames 5 frames 10 images
640 × 480 3 frames 5 frames 60 images
Frames per Second
Normal speed High speed
Continuous
Shooting
High-Speed
Continuous Shooting
AEB (Auto
Exposure Bracketing)
Single
Captures a quick series of still images while you press the
PHOTO button. For the number of frames per second, refer to
the table below.
The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps), allowing you to
choose the perfect exposed shot.
Records a single still image when you press the PHOTO button.
PHOTO button
DRIVE MODE button