U-Line 30 - Manual (Page 52)

52
Adjusting the Focus Manually
Autofocus may not work well on the following subjects. In such case, focus manually.
1. Set the program selector to
Q
.
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the focus.
3. Press the FOCUS button.
“MF” appears.
4. Turn the focus ring to adjust the focus.
• Turn the focus ring until the image appears focused.
• Press the FOCUS button to return to autofocus.
CARD PLAY CARD CAMERA PLAY (VCR) CAMERA
Through dirty or
wet windows
Night Scenes
Reflective
surfaces
Subjects with
low contrast or
without vertical lines
Fast Moving
Subjects
FOCUS button
Zoom lever
Focus ring
Program selector