Wind screen, Using headphones during recording – U-Line 30 User Manual

Page 62

Advertising
background image

62

Wind Screen

The camcorder reduces wind noise automatically. However, you can turn off the wind

screen when recording indoors, or when you want the microphone to be as sensitive

as possible.

Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to
[OFF] and close the menu.

“WS |” appears when you turn the wind screen off.

The wind screen function can only be used with the built-in microphone.

Using Headphones during Recording

The headphones terminal also serves as AV terminal. Headphones can only be used

when “

H” is displayed on the screen. If not, change the setting following the

procedure below.

Open the menu and select [VCR SETUP]. Select [AV/PHONES

H ], set it to

[PHONES

H ] and close the menu.

Adjusting the Headphone Volume

Open the menu and select [AUDIO SETUP]. Select [

H VOLUME], adjust the

volume with the SET dial and close the menu.

You can turn off the volume completely by turning the SET dial down until [OFF] appears.

Turn the SET dial up to increase the volume again.

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

VCR SETUP

AV/PHONES ••AV

(

37)

HVOLUME•••••

AUDIO SETUP

(

37)

WIND SCREEN••AUTO

AUDIO SETUP

(

37)

*

Only when [AUDIO DUB.] is set to [MIC IN].

*

Advertising
This manual is related to the following products:

40