U-Line 30 - Manual (Page 61)

61
Advanced Functions - Recording
E
❍ About the audio level indicator:
When [MIC LEVEL] is set to [AUTO], the audio level indicator switches on and
off with each press of the AUDIO LEVEL button.
❍ The audio level can be changed when the green bar is displayed. We
recommend hiding the bar when you have finished adjusting to prevent
accidental changes.
❍ The microphone level resets to [AUTO] when you switch the program selector
to [.
❍ We recommend using headphones when manually adjusting the audio level.
Microphone Attenuator
Use the microphone attenuator if you need to lower the volume level or correct audio
distortion during recording or audio dubbing. Check the audio levels with
headphones.
Open the menu and select [AUDIO SETUP]. Select [MIC ATT], set it to [ON]
and close the menu.
CARD PLAY CARD CAMERA PLAY (VCR) CAMERA
MIC ATT••••••OFF AUDIO SETUP
( 37)
12 -dB40 0
M Level indicator
Guide (green bar)
[MIC LEVEL]
is set to
[MANUAL]
*
Only when [AUDIO DUB.] is set to [MIC IN].
*