Universal Electronics Polaris - Manual (Page 11)

www.urcsupport.com
11
Device Table
NOTE:
Please refer to the table below when
performing the instructions in
“Programming Device Control” on page 12.
After programming, the Polaris Remote Control can
control the following types of devices:
INSTALLING BATTERIES
1. On the back of the remote control, push the
tab and lift off the battery cover.
2. Locate the two (2) enclosed AA batteries.
Match the + and - marks with those in the
battery case, then insert them. Align the
cover’s keys with the case’s holes and press the
cover back into place. The tab should click
when the cover is locked.
NOTE: When batteries need replacement, the remote
control ceases to operate. Replace the
batteries and the unit is restored to its full
functionality, complete with your favorite
settings.
Device Key Controls these types of devices
Cable Box (Converter)
The CBL key turns your cable box on
and off.
Television
The TV key turns your television on and
off.
3. Test the remote control by pressing any mode
key (e.g., TV). If the batteries are inserted
correctly, the LED (red light) blinks once.
❶
❷