Searching for your code, Turn on your tv, Note – Universal Electronics Polaris User Manual
Page 13
www.urcsupport.com
13
Device Type:___________________
TV Code
Device Type:___________________
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to
the Polaris Remote Control after trying all of the codes
listed for your brand, or if your brand is not listed at all,
try searching for your code.
To search for a code for your TV:
1.
Turn on your TV.
8.
To search for the code of your cable box,
repeat steps 1 through 5, but substitute the
appropriate key (e.g., CBL) for the cable box.
2.
On the remote control, press TV once; it blinks
once. Then press and hold SETUP until the TV
key blinks twice.
3.
Enter 9 9 1. The TV key blinks twice.
4.
Aim the remote control at the TV and press TV
once.
5.
Continually press and release CH+ until the
TV turns off. Stop when the TV turns off.
NOTE:
In the search mode, the remote control sends
IR codes from its library to the selected
device, starting with the most popular code
first.
6.
If the TV does not turn back on, slowly press
CH- until the TV turns on.
7.
Press SETUP once to lock in the code. The TV
key blinks twice.