Universal Electronics Polaris - Manual (Page 5)

www.urcsupport.com
5
turn off your television, press TV. The TV key
blinks once and your television turns off.
To Control your television:
Note: See “Key Charts” on page 9 to get an
overview of the functions of all the
keys available on your Polaris Remote
Control.
TURN ON BACKLIGHTING
Your Polaris Remote Control has a feature that
allows backlighting of all its keys. When
backlighting is turned on, the keys to your
remote control are lit when you press them.
To enable backlighting, do the following:
To disable backlighting, do the following:
1. Use the VOL key to raise or lower the
volume of your television. To raise the
volume, press VOL+. To lower the
volume, press VOL-.
1. Quickly press SETUP twice. All the
keys to your remote control are lit for a
few seconds, allowing you to easily see
them in low-light conditions. After
you have activated backlighting, any
time you press a key, the selected
device key (either TV or CBL) blinks
once. After the device key blinks, all
the keys on your Polaris Remote
Control are lit for a few seconds.
1. Quickly press SETUP twice. Keys no
longer are lit when you press them.
The selected device key (either TV or
CBL) still blinks once when you press
a key.