Ultratec PRO80 - Manual (Page 47)

2. Call your Superprint Pro80 LVD from a different TTY.
3. Wait for the Superprint Pro80 LVD to answer the call and send the Auto-Answer
message.
4. Type a slash followed by your password like this: /MYPASS (your password).
5. Press . The Superprint Pro80 LVD sends all of the Auto-Answer
information. When all of the messages have been sent, <END OF MESSAGES>
is briefly displayed followed by CLEAR MESSAGES Y/N.
6. Press to clear messages. MESSAGES CLEARED is displayed and the
Superprint Pro80 LVD hangs up.
Press to skip clearing messages. REPLAY MESSAGES Y/N? is displayed.
7. Press to replay messages. Go to step 5.
Press to skip replaying messages. PLEASE HANG UP is displayed and the
Superprint Pro80 LVD hangs up.
Here is a sample:
N
Y
N
Y
Enter
U S I N G A U T O - A N S W E R • 4 1
John calls from another TTY and
waits for his Auto-Answer
message to finish
He types his password.
He decides not to clear his
messages.
He ends the call by deciding not
to read his messages again.
When John typed his password,
it counted as another message.