Ultratec PRO80 - Manual (Page 62)

1. Press . CODE < AUTOMATIC> is displayed.
Options
5 6 • P E R S O N A L I Z I N G G E N E R A L O P T I O N S
2. Press until EDIT PREFIX <NO> is displayed.
3. Press the to change the option to <YES>.
4. Press . DIALING PREFIX > is displayed.
5. Type the prefix. There is room for up to 29 characters.
6. Press to save this setting and move to the next option in the menu, or press
to exit the Options menu without making any changes.
Interrupt
If you turn Interrupt off, you will not receive Interrupt request messages. Your
key will still send the interrupt message while someone else is typing.
1.
Press . CODE < AUTOMATIC> is displayed.
2. Press until INTERRUPT <ON> is displayed.
3. Press the to change the setting to <OFF>. Spacebar
Options
Interrupt
Esc
Enter
Enter
Spacebar
What items are programmed by the Printer button?
All of the settings that affect how your printouts look are programmed
with the
button. You have choices about the size of the font and
the way conversations are printed. With this button, you can also choose
to print all the items of a particular type such as all the Auto-Answer
messages currently in memory.
Printer
Print Font
Usually, the Superprint Pro80 LVD prints everything in bold letters. With the Print Font
option you can choose between normal, bold, wide or large letters.
1.
Hold down the key and press . PRINT FONT <BOLD> is
displayed.
2. Press the to change the setting.
3. Press to save this setting and move to the next option in the menu, or press
to exit the Print Setup menu without making any changes. Esc
Enter
Spacebar
Printer Program
Printer crosses paper twice for large print font.
An occasional white line may appear across text when using the large
print font. This happens because the printer moves across the paper two
times for each line of text. This does not mean that there is anything
wrong with the printer.