Uniden uh078sx - Manual (Page 15)

15
UHF Channels 22 and 23 are for telemetry and telecommand
applications. Transmit is inhibited on these channels.
LO
LO
TO TRANSMIT AND RECEIVE
The uh078sx Deluxe uses the 40 UHF-CB Channels. For your reference a list
of the available channels and corresponding frequencies is printed at the end
of this manual.
1. The maximum RF transmit power of uh078sx
Deluxe is 5 watts.
Press to change the transmit power
between High(5W), Middle(1W) and Low(0.5W).
HI appears when on high power. LO appears
when on low power. HI and LO disappear when
on middle power.
2. Before you transmit, listen for activity on the
selected channel.
3. When the channel is clear, press and hold the
PTT to transmit. TX appears on the LCD.
Hold the radio with microphone approximately
5 cm in front of your mouth with the
antenna at approximately 45° angle away from
your head. Speak in a clear, normal
conversational voice.
4. When you have finished speaking, release the
PTT and listen for a response. TX indicator
disappears on the LCD.
The display shows BUSY when a transmission
is being received by your radio.