Attaching the battery pack, Attaching the beltclip, Caution – Uniden uh078sx User Manual

Page 7

Advertising
background image

7

Attaching the Battery Pack

1. Place the battery pack onto the back of the

radio. It will only fit in one way.

2. Snap the battery release clip until it clicks.

Be sure the battery pack fits tightly against

the uh078sx Deluxe body.

Attaching the Beltclip

1. Hold the beltclip in the direction shown.

2. Apply it to the hanger piece on the back of

the radio. Then slide it up.

3. You will hear a click. The beltclip is firmly

attached.

CAUTION!

Avoid exposing the Lithium Ion battery, attached or unattached to
the radio, in direct sunshine, heated cars, or in areas with
temperatures below –20°C (–4°F) or above +60°C (+140°F).
Exposing the chemicals contained within the battery pack to
temperatures above +60 °C (+140°F) may cause the battery to
rupture, fail or reduce performance.
In case of exposure to cell contents, wash the affected area
thoroughly, and seek medical attention. Additional battery cautions
should be applied as described on page 2.

Contacts

4. To take the beltclip off the radio,

turn it and slid it up.

Advertising