Uniden uh078sx - Manual (Page 18)

18
If SCAN is deactivated while in an active channel, the uh078sx
Deluxe will stay on that active channel. If SCAN is deactivated while
scanning, the uh078sx Deluxe will reinstate the channel at start |
of scan.
Group Scan (GS) Mode
Allows you to monitor a Priority Channel while scanning.
To use GS Mode Scanning, press and hold the
key. GS appears on the
display.
GS Scanning checks the Priority channel activity regularly.
If GS Scanning is initiated when there are no channels
programmed in GS memory, an error tone will be heard and
scanning will not start.
If the Priority channel becomes active the radio will stay on that channel for as
long as the signal is present. If the received signal ceases, Priority scanning
continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel the
uh078sx Deluxe will continue monitoring the Priority Channel for
activity while listening to the active one.
To deactivate SCAN, press or PTT .
If SCAN is deactivated while it is turned to an active channel, the
uh078sx Deluxe will stay on that active channel. If SCAN is
deactivated while scanning, the uh078sx Deluxe will reinstate the
channel at start of scan.