Uniden uh078sx - Manual (Page 19)

19
Programming Scan Channels
1. Select which Scanning Mode you wish to use OS or GS Mode.
OS is indicated by the absence of the GS icon.
2. Select the channel you want to store by pressing or .
3. Press . M appears and a short tone beep is heard.
4. To remove the channels from Memory, press once more.
A short tone beep sounds and M disappears.
PRIORITY CHANNEL
The Priority Channel feature allows user to monitor one of 40 channels in the
uh078sx Deluxe, monitoring it every 1.5 secs. during Group Scanning.
Choosing a Priority Channel
1. Press four times. PRI and the priority
channel number flashes.
2. Press or to select the desired priority
channel. Channel 10 example is shown.
If OFF is selected then priority channel watch during
group scan will be inactive.
3. Press and hold to store setting.
DROP-OUT DELAY
While scanning, the uh078sx Deluxe stops at a busy channel and receives a
transmission. When the received signal is over, the unit will wait for 3 seconds
for the return of the signal, otherwise, the radio resumes scanning.