Primary user’s capability, Main screen with camera view, Snapshot button – Vivotek VS3102 User Manual

Page 33: Ptz camera control, Click on image, Zoom

Advertising
background image




www.vivotek.com

T:

886-2-22404099

F:

886-2-22404097




32

Primary User’s Capability

Main Screen with Camera View

There is a logo image shown in the upper left corner. It can link to other web sites or resources depending

on the settings in configuration. The assigned caption and system date/time will display in the banner

above the image window. There might be some windows enclosed by red lines shown in the image as

soon as motion is detected in the related windows.

Click on the configuration link to the right of the image window to enter the configuration page.

Snapshot button

The snapshot button enable user to capture a snapshot within a new window.

PTZ camera control

A PTZ motorized camera is provided by customers and should be correctly installed in advance. The

control buttons in the right side of the video allows users to control the motorized camera attached to the

Video Server with pan/tilt direction and zoom. To access the location set previously, pull down the Preset

Position list to select one and click on

. Only the Administrator can preset the camera locations. Users

with camera control privileges are only allowed to browse the preset locations. Five buttons in the right

side of the image can be used to control cameras in ways other than pan, tilt and zoom. They should be

pre-configured by Administrator with reference to the instruction manual of the cameras. The default

setting of camera control is none, and there would be no camera control button if none camera is selected.

Click on Image

If PTZ camera is installed to the Video Server, user can click any position on the image to drive camera

move to the position. It would be much easier this way to control camera to move to the desired position.

So far video server support Sony EVID30, Cannon VCC4 or Pelco-D PTZ camera for this functionality

Zoom

This feature allows users to open a digital zoom control window to specify the zoom factor for specified

area in the camera view. Users can also move the white frame to select the area of the video that she/he

wants to view

“Disable digital zoom” The checkbox selection allows users to disable/enable the digital zoom

function.

Advertising