Vivotek VS3102 - Manual (Page 41)

www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
40
Network settings
Any change made to this page will restart the system in order to validate the changes. Make sure every
field is entered correctly before clicking on .
"Reset network at next boot", the default status is checked to avoid erroneous entries during installation.
This can be tedious having to perform software installation whenever the Video Server starts. Therefore,
once the network settings, especially the IP address, have been entered correctly, uncheck this option. If
this option is disabled, the Video Server will boot up by the current IP address. The Video Server can
automatically restart and operate normally after a power outage. Users can run IP installer to check the
IP address assigned to the Video Server if the IP address is forgotten or using the UPnP function provided
by the Video Server (MS Windows XP provides UPnP function in the “my network place”)
Administrator may modify the network settings to fit into existing networks. Some broadband service